Once the hazards and the people at risk have been identified, you must assess the effect of any particular hazards, taking account of any existing control measures already in place. Once this has been done, you must decide if any further control measures are needed in order to reduce the risk to an acceptable level.
Further control measures may:
- act to reduce the possibility of ignition.
- minimise the potential fuel load in the premises.
- assist people to escape from the effects of a fire, should it occur.
They may fall into a number of different categories, such as:
- fire safety management systems.
- means of escape.
- staff training.
- fire warning systems.
- means of fighting fire.
Different control measures can be applied to reduce the risk to an acceptable level. For example, if the risk is the possibility of a fast growing fire, potential control measures could include one or any combination of the following:
- changing the process to use a slower burning fuel.
- removing or reducing possible ignition sources.
- moving the hazard to an area that affects the minimum number of people, eg outside the premises.
- providing an additional exit/protected route to speed up the escape of the occupants.
- providing a fire detection and alarm system to warn people of the fire in its early stages.
- training staff to reduce the possibility of a fire occurring, eg housekeeping/safe working practices.
- providing appropriate firefighting equipment / fixed installation, eg sprinkler system.
While this list is not exhaustive and applies to one area of risk only, it can be seen there may be a number of different solutions depending on the nature of the situation.
If any areas of inadequacy are identified, an action plan must be included to show how the problem is being addressed. This should include timescales for achieving the required level of control and specify who is responsible for the action.
If your premises are situated in a relatively modern building, it should already incorporate important control measures, eg fire escape staircases, fire lobbies, fire doors, emergency lighting etc.
Many of these measures will also be found in older buildings. If your building was issued with a fire certificate under the Fire Precautions Act, details of existing control measures will be detailed in that document.
You should include details of these existing control measures in your fire risk assessment. Remember, a full understanding and evaluation of the existing control measures is essential - it is your starting point for deciding if any further action is necessary.
You should plan, control, monitor and review all the fire safety arrangements.
Go to step 4 of 5 - Record your findings
<<Back
